Quite right, command "=" it is, as command "+" would require the Shift key to be down. I just look for the plus sign thoughgemboy27 wrote:I think it is cmd = to make it bigger and cmd- for smaller
Official Nisus Writer Express 2.7 Beta Thread
but for me
I went right off and tried it, and no luck, so tha is when I checked the menubar to see what it should be,
that said
when I do
cmd= it enlarges the flie to 200%
cmd- shrinks it back down to 133%
after that, if I go to change it by clicking on the right hand corner and make it 128% it appears to go to that size, but still displays 133% in the corner
and if I do other, it does similar glitchy displays. The actual display seems to be right, just shown display in the corner isn't always right
intel G5, 10.4.6 2.7b9
that said
when I do
cmd= it enlarges the flie to 200%
cmd- shrinks it back down to 133%
after that, if I go to change it by clicking on the right hand corner and make it 128% it appears to go to that size, but still displays 133% in the corner
and if I do other, it does similar glitchy displays. The actual display seems to be right, just shown display in the corner isn't always right
intel G5, 10.4.6 2.7b9
I have never let my schooling interfere with my education/Mark Twain (1835-1910)
A more general bug is that changing the zoom to a custom value often leaves the previous value displayed in the zoom popup in the lower right corner.gemboy27 wrote:if I go to change it by clicking on the right hand corner and make it 128% it appears to go to that size, but still displays 133% in the corner
perhaps a feature request
know what would be nice? if you could program a percentage in....
I like 142% and set up my .dot files as that, however when I open a non-original NWE file it defaults to 100 percent, which is fine, but I would like to be able to pull down (up?) to my pre-programed size.. (142%)
I like 142% and set up my .dot files as that, however when I open a non-original NWE file it defaults to 100 percent, which is fine, but I would like to be able to pull down (up?) to my pre-programed size.. (142%)
I have never let my schooling interfere with my education/Mark Twain (1835-1910)
the vanishing scroll bar
Beta 9 has a funny little bug. When opening a doc in draft view, or just switching back to a window with a doc in draft view, the scrollbar is gone. You have to switch to page view and then back to draft view to get it back.
-
- Official Nisus Person
- Posts: 135
- Joined: 2002-07-11 17:19:40
- Location: Solana Beach, CA
- Contact:
Re: the vanishing scroll bar
Yup, we found it too. However, it has been fixed for beta 10, which hopefully will be out in the next few days.Agnostus wrote:Beta 9 has a funny little bug. When opening a doc in draft view, or just switching back to a window with a doc in draft view, the scrollbar is gone. You have to switch to page view and then back to draft view to get it back.
could you call it "beta X" for the gem
x (10) you are working us beat boys (and girls) to death
keep it coming
Gem*Boy
keep it coming
Gem*Boy
I have never let my schooling interfere with my education/Mark Twain (1835-1910)
-
- Official Nisus Person
- Posts: 135
- Joined: 2002-07-11 17:19:40
- Location: Solana Beach, CA
- Contact:
2.7 Beta 10
Just to get your weekend started on the right (write?) foot, here is Express 2.7 beta 10. Some tweaks, some bug fixes, and lot's of fun for everyone!
Release notes can be read here.
Have a great weekend, and happy testing!
Release notes can be read here.
Have a great weekend, and happy testing!
Last edited by dave on 2006-05-06 01:32:33, edited 1 time in total.
-
- Posts: 36
- Joined: 2005-12-20 02:34:41
Re: 2.7 Beta 10
404'eddave wrote:Just to get your weekend started on the right (write?) foot, here is Express 2.7 beta 10. Some tweaks, some bug fixes, and lot's of fun for everyone!
Release notes can be read here.
Have a great weekend, and happy testing!
PowerPC; Mac OS 10.5.8; NWP 1.4
-
- Official Nisus Person
- Posts: 135
- Joined: 2002-07-11 17:19:40
- Location: Solana Beach, CA
- Contact:
Re: 2.7 Beta 10
Fixed!Cletus Awreetus-Awrightus wrote:404'eddave wrote:Just to get your weekend started on the right (write?) foot, here is Express 2.7 beta 10. Some tweaks, some bug fixes, and lot's of fun for everyone!
Release notes can be read here.
Have a great weekend, and happy testing!
-
- Posts: 13
- Joined: 2005-10-18 14:52:40
- Location: Hudson River Valley, NY
Full Screen Experience 2.7.b10
I do like full screen mode--it is less distracting.
However I find the delay in showing the menu bar a little too long.
I'd prefer a preference option for always showing the menu bar in full-screen mode.
Thanks
However I find the delay in showing the menu bar a little too long.
I'd prefer a preference option for always showing the menu bar in full-screen mode.
Thanks
o a delay
ha thanks SteveSamuels
I didn't even realize that the menu bar showed up, I hit escape and left before it happened.
Full page view doesn't work for me on a 17 inch iMac since it makes the text smaller, my oder eyes needs a 157 percent view
-----------
glich:
so after looking at full page then bouncing from 200% to 333% to 33% then to 153% ...
The ruler remains small, as if I was looking at a 33% page, though the page is 153%
I didn't even realize that the menu bar showed up, I hit escape and left before it happened.
Full page view doesn't work for me on a 17 inch iMac since it makes the text smaller, my oder eyes needs a 157 percent view
-----------
glich:
so after looking at full page then bouncing from 200% to 333% to 33% then to 153% ...
The ruler remains small, as if I was looking at a 33% page, though the page is 153%
I have never let my schooling interfere with my education/Mark Twain (1835-1910)
cmd-c
When I select all (cmd-a) then try to cmd-c, I get a sound error, but if I do teh copy from the menubar (pull down copy) it works fine and then I can cmd-c
but if I do cmd-a again and try cmd-c I get a sound error and the copy doesn't work
it seems like the cmd-a is related. When I start with a new file or opening a file fresh after restarting NWE, the cmd-a is how it starts the sound error
I should add that it seems with any sound error, it sounds twice
g5 intel 10.4.6 NWE 2.7b10
but if I do cmd-a again and try cmd-c I get a sound error and the copy doesn't work
it seems like the cmd-a is related. When I start with a new file or opening a file fresh after restarting NWE, the cmd-a is how it starts the sound error
I should add that it seems with any sound error, it sounds twice
g5 intel 10.4.6 NWE 2.7b10
I have never let my schooling interfere with my education/Mark Twain (1835-1910)
battle
I'm kind of struggling with beta 10
my new file.dot keeps changing the settings that I set.
I will save my 'Normal' in that file, but when I open it up or a new file, those settings are lost
and no matter how many times I select page view, it defaults back to draft view.
kind of wacky
ps
remind me to make a copy of my new file.dot next time... ouch
my new file.dot keeps changing the settings that I set.
I will save my 'Normal' in that file, but when I open it up or a new file, those settings are lost
and no matter how many times I select page view, it defaults back to draft view.
kind of wacky
ps
remind me to make a copy of my new file.dot next time... ouch
I have never let my schooling interfere with my education/Mark Twain (1835-1910)
and
kind of a little thing...
when I am set up I have:
Pallette group
Paragraph
Character
Language
then a side window --- free floating -- with
Columns
Sections
Styles
in that Styles window, my selected style is not highlighted, I am pretty sure that is the style of my document, but it doesn't display it....
[/b]
when I am set up I have:
Pallette group
Paragraph
Character
Language
then a side window --- free floating -- with
Columns
Sections
Styles
in that Styles window, my selected style is not highlighted, I am pretty sure that is the style of my document, but it doesn't display it....
[/b]
I have never let my schooling interfere with my education/Mark Twain (1835-1910)